SEALERS & CLEANERS

Starpatch S-815 Low VOC Concrete Sealer is a premium, easy to use low gloss sealer, ideal for protecting and enhancing the appearance of concrete, exposed aggregate driveways, interlocking paving stones, patio slabs and concrete blocks. This product gives the substrate exceptional abrasion resistance and an easy maintenance surface that resists dirt, oil, grease and other contaminants. This product meets government VOC regulations for solvent-based sealers.

Starpatch S-830 Low VOC Concrete Sealer is a premium, easy to use high gloss finish sealer, ideal for protecting and enhancing the appearance of concrete, exposed aggregate driveways, interlocking paving stones, patio slabs and concrete blocks. This product gives the substrate exceptional abrasion resistance and an easy maintenance surface that resists dirt, oil, grease and other contaminants. This product meets government VOC regulations for solvent based sealers.

Clarity Clear Acrylic Sealer is a penetrating water borne clear acrylic sealer formulated for use on interior wood and interior and exterior concrete and masonry surfaces. Use where the “wet look” is desired on concrete and masonry. Provides a satin or semi-gloss sheen on wood surfaces.

Starpatch Concrete Oil and Stain Cleaner is a specially formulated cleaner that will remove staining from oil and related products from most substrates. Starpatch Concrete Oil and Stain Cleaner is worker safe, environmentally responsible and available in various sizes.

Broda Eff-Off – Concentrated Efflourescence Remover is formulated to remove white staining on concrete, masonry and fibre cement board without damaging the substrate. A component of Eff-Off will remain behind in the substrate to greatly reduce the reoccurrence of the efflourescence.  Eff-Off can be used to clean concrete from tools and can be used to clean mortar splatter on brick and rocks. Added metal corrosion inhibitors will prevent damage to tools. Use Eff-Off to etch polished concrete prior to coating. Eff-Off is much less corrosive than other efflourescence cleaners and will not yellow the substrate.

AmeriPolish developed 3D Hybrid Silicate Densifier to help keep concrete look newer longer. Penetrating deep into concrete, 3D Hybrid Silicate Densifier improves surface performance and resists harmful effects of traffic wear and weathering. High penetration densifiers can improve performance of both new and aged concrete. 3D Hybrid Silicate Densifier will help in rejuvenating old or aged concrete. 3D Densifier can also be used with integrally colored cements.

The water and oil repelling qualities of Ameripolish SR2 Solvent-Based Sub-surface Stain Resistor 2 provides superior stain protection on most substrates. With a small molecular structure, maximum penetration is assured. Penetration depth is controlled by the application rate, or loading rate. This makes SR2 ideal for protecting polished concrete and other dense, color-sensitive surfaces. Moisture and water-carried salts are blocked, minimizing chlorides and surface erosion. This product effectively covers 3000 to 5000 square feet per gallon and it lasts up to 3 years. Ameripolish SR2 is part of a two-component Penetrating stain repellent specifically formulated to protect polished, dyed and non-dyed concrete from oil, water-based stains and acidic etching agents. Designed specifically for protecting non colored and colored polished concrete floor. To obtain optimum performance, Ameripolish SR2 is to be used with Ameripolish 3D (HS or HSL) Densifier. Ameripolish SR2 can also be used with dyes and identifiers from other manufacturers; however, optimum stain resistance and color retention cannot be assured.

Pentra-Finish (LG) is a patented, satin, stain and wear resistant finish for improving the sheen, hardness and chemical resistance of natural and cast stone, terrazzo, masonry, and other cement-based surfaces. This water-based, lithium fortified chemical polish dries quickly to a clear, extremely hard, microcoating that tenaciously bonds and reacts with the substrate forming an insoluble bond. Formulated using reactive silicon hybrid polymer technology (SiRE) for extreme gloss, rapid shine development and excellent wear properties, this novel treatment eliminates the need for floor waxes, liquid polishes and conventional resin based coatings. Best results and coverage will be obtained by densifying the surface with approved Nano-Lithium Densifier before applying Pentra-Finish (LG).

Pentra-Finish (HG) is a patented, high-gloss, stain and wear resistant finish for improving the sheen, hardness and chemical resistance of natural and cast stone, terrazzo, masonry, and other cement-based surfaces. This water-based, lithium fortified chemical polish dries quickly to a clear, extremely hard, microcoating that tenaciously bonds and reacts with the substrate forming an insoluble bond. Formulated using reactive silicon hybrid polymer technology (SiRE) for extreme gloss, rapid shine development and excellent wear properties, this novel treatment eliminates the need for floor waxes, liquid polishes and conventional resin based coatings. Best results and coverage will be obtained by densifying the surface with approved Nano-Lithium Densifier before applying Pentra-Finish (HG).

Pentra-Sil (HD) is a premium lithium polysilicate performance densifier for concrete surfaces. This high solids formula provides maximum hardening to improve abrasion resistance and reduce dusting. This easy-to-use water-based solution requires no rinsing and is VOC compliant in all areas of the world. When sprayed on new or existing concrete, it penetrates up to 1/4 inch (7mm) where it reacts with free calcium to form insoluble calcium silica hydrate, which makes concrete more water, stain, and abrasion resistant for easier maintenance and longer life. It is also suitable for concrete polishing procedures and helps prolong the life of polished finishes.

Pentra-Hard Densifier is advanced lithium chemistry that hardens and dustproofs new and existing concrete. This easy-to-use water-based solution requires no rinsing and is VOC compliant in all areas of the world. When sprayed on new or existing concrete, it penetrates into the concrete, where it reacts with free calcium to form insoluble calcium silica hydrate, which makes concrete more water, stain, and abrasion resistant for easier maintenance and longer life. It is also suitable for concrete polishing procedures and helps prolong the life of polished finishes.

Pentra-Hard Guard is a high performance finish that adds shine, stain resistance and abrasion resistance to concrete. Effective on all concrete and cement-containing floors, this water-based, lithium-fortified material cures quickly to form a clear, extremely hard, micro-coating that protects the substrate, even in demanding industrial and commercial environments. This new chemistry makes concrete surfaces more attractive and easier to maintain, and eliminates the need for waxes, polishes, and acrylics. Best results and coverage will be obtained by densifying the surface with Pentra-Hard Densifier before applying Pentra-Hard Guard.