TENNANT ECO-MPE MULTI-PURPOSE EPOXY
Eco-MPE – Multi-Purpose Epoxy is an easy to use self-leveling 100% solids epoxy that provides a high-gloss finish. This low odor formula provides a long-lasting primer and build coat. Use Eco-MPE to level floors, as a concrete primer before applying another epoxy or urethane, over other 100% solids epoxies, as a crack filler or use Eco-MPE as a stand-alone coating (a finish coat of urethane is recommended.)
TENNANT ECO-GPE EPOXY
Eco-GPE is a clear, two-component, 100% solids epoxy. Applied at 3 mils (0.08 mm) for priming or up to 30 mils (0.76 mm) (1/32 inch) as a build coat. Colors are optional. Eco-GPE can be used to level floors, or as a concrete primer before applying another epoxy or urethane, over other 100% solids epoxies, as a crack filler or Eco-GPE can be used as a stand-alone coating. (A finish coat of urethane is recommended.)
TENNANT ECO-FLEX EPOXY
Eco-FLEX is a clear, two-component, 100% solids epoxy applied at 3-5 mils for priming or up to two coats of 20 mils as a flexible waterproofing membrane. Eco-FLEX complies with U.S. Federal VOC regulations, reduces cracking in areas subject to damage from vibration or sub-floor movement, continues to flex and bend, to withstand cracking, throughout the life of the coating.
CTS Rapid Set TXP TRU Epoxy Concrete Primer
Prime your concrete for the most porous floor with CTS Rapid Set TXP TRU Epoxy Concrete Primer.
When you need a high performance epoxy primer for use with your finished TRU Self Leveling flooring applications, use Rapid Set TXP (TRU Epoxy Primer). This two-component, low VOC, moisture- and alkali-insensitive epoxy primer is recommended for most wear topping and decorative system installations. You can use TXP on moist substrates or five-day-old “green” concrete. Seal porous concrete with TXP to prevent pinholes and install floors quickly. Place moisture-insensitive flooring such as TRU Self Leveling in as little as 12 hours. With one-coat application, TXP is easy to use and offers high bond strength.
When applied at 12 mils (0.3mm) thickness, the adhesion of TXP and TRU Self Leveling will remain unaffected by moisture vapor transmission (MVT) and alkalinity up to pH of 14. Comply with subsequent manufacturer’s testing and installation requirements when their products are used in conjunction with TRU Self Leveling as part of an installed floor system.
CTS RAPID SET TXP FAST TRU EPOXY CONCRETE PRIMER
Rapid Set TXP FAST: Two Component, Alkali Resistant Epoxy Primer
When you need a high performance zero VOC epoxy primer for use with your finished TRU Self Leveling flooring applications, use Rapid Set TXP FAST. This two-component, alkali resistant epoxy primer has been specially formulated to have excellent substrate wetting capabilities to promote penetration and adhesion. TXP FAST is moisture tolerant and resistant to elevated pH levels. With TXP FAST, the overlayment may be placed in as little as 6 hours.TXP Fast Primer can be used on floors with a Moisture Vapor Emission Rate up to 20 lbs, RH of 100% and pH up to 14. Comply with subsequent manufacturer’s testing and installation requirements when their products are used in conjunction with TRU Self Leveling as part of an installed floor system.
CTS RAPID SET HIGH-ADHESION ACRYLIC CONCRETE FLOOR PRIMER
If you’d like to simplify your TRU Self Leveling projects, use Rapid Set Acrylic Primer to improve the adhesion of TRU Self Leveling to properly prepared concrete. You can also seal porous concrete surfaces to prevent pinholes and bubbles from forming in the finished surface with Rapid Set Acrylic Primer. Available in 1-gallon jugs that cover about 400-600 square feet.
Mix this entire gallon of primer and dilute with one gallon of water for 2 gallons of workable solution. It can be easily applied with a stiff bristle broom or scrub brush to make sure it is even distributed. To get a properly laid concrete floor, make sure to read the directions and warnings on the bottle.